Azərbaycan 
Русский SecuriSmoke ASD
Aspirating smoke detectors (ASD 531, 532, 535) that draw air through sampling pipes to a very sensitive detector — pipe networks up to 300 m on the larger models.
Brand — Securiton
Securiton Aspirating Smoke and Linear Heat Detection in Azerbaijan
Securiton aspirating smoke detection, linear heat detection and fire alarm systems from Switzerland — specified, supplied, installed and maintained by ZE-Tronics in Azerbaijan.
Supply · Installation · Service in Azerbaijan
Manufacturer
Securiton AG, Zollikofen, Switzerland
Founded
1948
Group
Swiss Securitas Group
Core field
Aspirating smoke, linear heat and fire alarm systems
Some rooms cannot wait for smoke to reach a ceiling detector. In a data centre or a control room, strong ventilation dilutes smoke and carries it away; in a high-bay warehouse the smoke may never rise that far. Securiton, a Swiss manufacturer established in 1948 and part of the Swiss Securitas Group, specialises in detection for these places.
ZE-Tronics designs, supplies, installs and maintains Securiton systems in Azerbaijan.
SecuriSmoke aspirating smoke detection
An aspirating smoke detection (ASD) system pulls air through a network of pipes with small sampling holes and analyses it in one sensitive detector. The SecuriSmoke ASD 531, 532 and 535 models cover small rooms to large areas, with pipe networks of up to 300 m on the larger units. Because the detector is sensitive and the air is sampled continuously, smoke can be detected at a very early stage — while there is still time to find the cause.
Typical applications:
- Data centres, server rooms and telecom shelters
- Control rooms and electrical rooms in industrial plants
- High-bay warehouses and cold stores
- Clean rooms and laboratories
- Heritage and public buildings where visible detectors are unwanted
Our article on aspirating smoke detection explains when ASD is the right choice and how it is designed.
SecuriSens linear heat detection
Where smoke detection is unreliable — tunnels, car parks, conveyor belts, cable trays or dusty areas — line-type heat detection follows the risk along its full length. SecuriSens systems are used in road and rail tunnels and industrial conveyors, a good fit for infrastructure and transport projects.
Design matters more than hardware
An ASD system works only if the pipe network is calculated correctly: hole sizes, pipe lengths and fan settings decide the sensitivity at each hole and the time it takes smoke to reach the detector. We use the manufacturer’s design software, then prove the result at commissioning with smoke and transport time tests from the far end of each pipe.
What we do
We help you choose between ASD, point, beam and linear detection, design the system, supply original Securiton equipment, install it and integrate it with the building’s fire alarm and any gaseous suppression. After handover, our maintenance team checks airflow and filters and keeps records. Contact us to plan a system.
Product families
What Securiton makes
SecuriSens linear heat detection
Line-type heat detection for tunnels, car parks, conveyors, cable routes and cold stores, where point detectors struggle.
SecuriFire
Fire alarm control systems for networking, visualisation and control of large sites.
Beam and special detection
Detection for large volumes and demanding environments.
Planning tools
ASD PipeFlow design software to calculate pipe networks and transport times.
Local support
What ZE-Tronics does for Securiton users
- 01 Choice between ASD, point, beam and linear heat detection
- 02 Pipe network design and transport time calculation
- 03 Supply of original Securiton equipment
- 04 Installation of sampling pipes, detectors and cabling
- 05 Integration with the building fire alarm and extinguishing control
- 06 Commissioning with smoke and transport time tests
- 07 Periodic maintenance, filter changes and airflow checks
- 08 Operator training and documentation
One accountable chain, concept to calibration
Fire and gas systems fail at the handover points between vendors. We own every step, so there are none.
01
Hazard review
02
Detection design
03
Certified supply
04
Installation
05
Commissioning
06
Calibration & support
Certifications that matter on site
- EN 54-20 — aspirating smoke detectors (sensitivity classes A, B and C)
- NFPA 72 — National Fire Alarm and Signaling Code
- BS 5839-1 — fire detection and alarm systems for buildings
- VDE 0833-2 — hazard alarm systems for fire
- EN 54-22 — line-type heat detectors (model dependent)
Frequently asked
Securiton in Azerbaijan — questions and answers
Where is aspirating smoke detection used?
Where very early warning matters or point detectors are impractical: data centres, telecom and control rooms, clean rooms, high-bay warehouses, cold stores, heritage buildings and areas with high airflow. ASD finds smoke at very low concentrations, often before a fire is visible.
How is an ASD system different from ordinary smoke detectors?
A fan draws air continuously through a pipe with small sampling holes to one central detector. Each hole acts like a detection point, but the sensitive unit can be installed where it is easy to reach for maintenance.
What does EN 54-20 class A, B or C mean?
They are sensitivity classes. Class A is very high sensitivity for early warning in special environments, class B is enhanced sensitivity, and class C covers normal sensitivity comparable to point detectors. The design must also keep transport time within limits — 120 seconds is the usual maximum.
Can Securiton detection be connected to our existing fire alarm panel?
In most cases yes, via relay or interface modules. For larger systems SecuriFire can act as the main control. We check compatibility before design.
Do you maintain ASD systems?
Yes. We check airflow, clean or replace filters, test transport time from the far end of each pipe and record the results.
Next step
Plan a Securiton ASD or linear heat system with us
Send us a model number, a datasheet or an equipment list. Our engineers reply within one business day.
Contact a safety engineer
