Brand — Apollo Fire Detectors

Apollo Fire Detectors in Azerbaijan

Apollo addressable and conventional fire detectors, call points and interfaces from the UK — Soteria, Discovery, XP95 and intrinsically safe ranges — supplied and installed in Azerbaijan by ZE-Tronics.

Request a quote All brands
Manufacturer Apollo Fire Detectors, Havant, UK
Founded 1980
Group Part of Halma plc
Reach Distributed in more than 100 countries

Apollo Fire Detectors has designed and manufactured fire detection devices in Havant, UK, since 1980 and is part of Halma plc. Its detectors are used with many different control panels around the world, because Apollo publishes its communication protocol and keeps its ranges backwards compatible.

ZE-Tronics supplies Apollo detectors in Azerbaijan and designs, installs and maintains the systems they belong to.

Apollo addressable ranges

  • Soteria — the latest generation, with advanced optical sensing; Soteria Dimension is a flush-mounted version for interiors where appearance matters.
  • Discovery — built on XP95 technology, with selectable response modes for different environments.
  • XP95 — the long-established range that many existing systems use.
  • XP95 I.S. — intrinsically safe detectors for hazardous areas, connected through approved barriers.

Backwards compatibility means an existing XP95 system can often be extended or upgraded with newer devices without replacing the whole loop. We confirm compatibility with your panel before supply.

Conventional detection

For smaller, zone-based systems Apollo offers conventional ranges such as Orbis. Whether conventional or addressable is right depends on building size and complexity — see addressable vs conventional fire alarm systems.

Detection in hazardous areas

Industrial sites often have a mix of safe and hazardous areas. With XP95 I.S. detectors, an addressable system can extend into a Zone 1 or Zone 2 area through intrinsically safe barriers, instead of using separate explosion-proof devices. The design has to respect cable parameters and the area classification — see our articles on hazardous area zones and Ex marking.

Panels and integration

Apollo detectors work with many panels that support the Apollo protocol, including Kentec Syncro and Taktis panels. We plan loops, isolators and addresses, program the panel and test every device at commissioning.

What we provide

Contact us with your part numbers or building details.

Product families

What Apollo Fire Detectors makes

01

Soteria

Latest-generation addressable detectors with advanced optical sensing, including the flush-mounted Soteria Dimension.

02

Discovery

Addressable detectors built on XP95 technology with selectable response modes.

03

XP95

The long-established addressable range, backwards compatible with newer Apollo ranges.

04

XP95 I.S.

Intrinsically safe addressable detectors for use in hazardous areas via approved barriers.

05

Conventional detectors

Orbis and other conventional ranges for zone-based systems.

06

Call points and interfaces

Manual call points, input/output units, isolators and sounders on the detection loop.

Local support

What ZE-Tronics does for Apollo Fire Detectors users

  • 01 Choice of detector type for each room and hazard
  • 02 Loop design, isolator placement and address planning
  • 03 Supply of original Apollo detectors, bases and interfaces
  • 04 Hazardous area design with XP95 I.S. and barriers
  • 05 Installation and connection to Kentec and other compatible panels
  • 06 Commissioning and device-by-device testing
  • 07 Maintenance, sensitivity checks and replacement programmes
  • 08 Upgrades from older Apollo ranges using backwards compatibility

One accountable chain, concept to calibration

Fire and gas systems fail at the handover points between vendors. We own every step, so there are none.

01 Hazard review
02 Detection design
03 Certified supply
04 Installation
05 Commissioning
06 Calibration & support

Certifications that matter on site

  • EN 54-7 — point smoke detectors (product dependent)
  • EN 54-5 — point heat detectors (product dependent)
  • EN 54-11 — manual call points (product dependent)
  • EN 54-17 — short-circuit isolators (product dependent)
  • ATEX / IECEx for intrinsically safe detectors (model dependent)
  • UL-approved XP95A and Soteria UL ranges for UL markets
Frequently asked

Apollo Fire Detectors in Azerbaijan — questions and answers

Where can I buy Apollo detectors in Azerbaijan?

ZE-Tronics supplies Apollo addressable and conventional detectors, bases, call points and interfaces. Send us the part numbers or the panel type and we will confirm compatibility.

Are Soteria detectors compatible with my XP95 system?

Apollo designs its ranges to be backwards compatible, which usually allows Soteria or Discovery devices on an existing XP95 loop. We confirm compatibility with your panel before supply.

Can Apollo detectors be used in hazardous areas?

Yes, with the XP95 I.S. intrinsically safe range connected through approved barriers or isolators. The design must follow the intrinsic safety rules for cable parameters and zone classification.

Which panels work with Apollo detectors?

Many panel manufacturers support the Apollo protocol, including Kentec. We check the protocol and loop capacity when designing the system.

How often should detectors be tested?

Fire alarm systems are usually serviced at least every six months, with every detector functionally tested within each year. Local regulations and the building's fire strategy may require more.

Next step

Choose the right Apollo detectors for your project

Send us a model number, a datasheet or an equipment list. Our engineers reply within one business day.

Contact a safety engineer

Other brands we supply

All brands